Jammin-pro StudioMix 10 Uživatelský manuál

USER'S MANUAL

The FX SEND connector outputs the signal you picked up from the individual using the FX controls. You can connect this to the input of an external

8If the connected effects processor receives no input signal. the FX SEND control is probably too low. This also goes for the built-in effects process

9POWERPlease do not connect microphones to the mixer (or the stagebox/wallbox) as long as the phantom power supply in switched on. Connect the micro-P

The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions, whic

·Power SupplyThe apparatus should be connected to the power supply only of the type as marked on the apparatus or described in the manual. Failure to

TABLE OF CONTENTS1.INTRODUCTION...21.1 General mixing console functions...

1.INTRODUCTION Congratulations! In purchasing the StudioMix 10 / StudioMix 12 series micing concoleyou have acquired a mixing console whose small

1.2 The user’ s manual The user’ s manual is designed to give you both an overview of the controls, as well as detailed information on how to use t

Please note that all unit must be properly grounded. For your own safety, you should never remove any ground connectors from electrical devices or po

The circuitry of the British EQs is based on the technology used in the bast-known top-of-the-line consoles and providing a warm sound without any

The PAN control determines the position of channel signal within the stereo image. This control features a constant-power characteristic, which mea